TomCat Recon

The TomCat RECON walk behind auto scrubber brings Tomcat’s renowned toughness into the smallest category to date.

The solution and recovery tank tips back for easy scheduled maintenance, and the thick steel frame and heavy duty components keep this scrubber working long after others have been flushing with full access to the tank’s interior and improved sanitation.

Available for:

Short lease

Long lease

To purchase

Product demo

Contact us for more information or call 0113 272 1699

Tomcat’s RECON Floor Scrubber Dryer is known for its small, simple design and durable construction, offering unmatched value for the customer. The RECONFloor Scrubber Dryer comes equipped as a Pad Assist or Traction Drive machine. The Traction drive unit includes a powerful all-gear transaxle for climbing ramps and max operator ease.

While keeping with the constant durability that Tomcatmachines have to offer, your operators will find the RECON Floor Scrubber Dryer easy to maneuver into tight areas, and simple to service. The deck is protected by the steel frame and large polyurethane rollers to keep the unit from marking walls.

Scrub Heads Available:

  1. Disk – Gives you the option to choose between a brush or pad, has the lowest maintenance cost, improves cleaning on uneven floors, and individually driven brushes enhance performance.
  2. Cylindrical – Has superior grout cleaning abilities, it can scrub and sweep simultaneously, and eliminates dust mopping.
  3. EDGE – mainly used for maintaining and stripping floors (without chemicals), wet screens wood gym floors and boasts a 70% reduction in water usage.

Specification

Size (L x W x H) 35'' × 18'' × 38'' (89 × 46 × 97 cm)
Drain Saver 30 cubic inches (492 cubic cm)
Solution Flow / Filter 0 - 0.5 GPM / Stainless Inline (0 - 2 LPM)
Solution Tank Capacity 10 Gallons (38 liters) - w/ Graduated Site Tube
Scrubbing Speed 0 - 184 ft/min / 2 mph (0 - 56 m/min / 3 km/h)
Power 0.75hp - All Gear / Sealed (559 watts) & Pad Assist
Charger 120VAC / 60 Hz Input - 24VDC / 8 amp Output
Run time Up to 2.5 Hours
System voltage 24 VDC
Brush down pressure Up to 100 lbs (45 kg)
Optional Disk Motor (1×) 1.0 hp / 200 rpm (746 watts)
Disk brush speed 200 rpm
Disk motor (1×) 0.75 hp / 200 rpm (559 watts)
Weight w/o batteries 110 - 160 lbs (50 - 73 kg)